D&D Dice Tray Generator

Use the 3D AI Studio MCP to run the "D&D Dice Tray" template (https://www.3daistudio.com/templates/dnd-dice-tray) for me.

My idea: A red dragon coiled around the rim
Shape: Round
Rim: Sculpted
Floor: Smooth
Finish: Painted

Follow these steps in order. The prompts and settings are the template's own, so use them word for word and only put my idea where it says {MY IDEA}.

1. Design the dice tray
Call generate_image_nano_2_1 with aspect_ratio "1:1", resolution "1K", output_format "png" and this prompt:
"""
Theme: {MY IDEA}. A single tabletop dice tray designed for 3D printing: one open, shallow tray with thick sturdy walls about 3 cm tall around the whole edge and a wide, perfectly flat, smooth, completely empty floor for rolling dice (no dice, no bumps, no objects and no sculpting on the floor). The theme is sculpted only on the outside of the walls and along the top of the rim, chunky and solid with no thin parts sticking out, everything attached. The bottom of the tray is flat. Shown in a three-quarter view from above so the empty floor inside is clearly visible, the entire tray visible with generous empty margin. Isolated on a seamless pure white (#FFFFFF) background, soft even studio lighting, no shadows on the background, no text. Shape: a round tray about 20 cm across. Light and surfaces: soft, even, diffuse studio light from the front, and at most a soft satin sheen: no mirror-like gloss, no bright white hot spots or glare, and no reflections of lights, windows or surroundings. Finish: painted in rich colours like a finished tabletop piece, with washes and edge highlights.
"""
If I want to start from a sketch or reference image instead, call upload_image so I can hand it over, then call edit_image_gpt with the upload in images, quality "low", output_format "png" and this prompt:
"""
Use the emblem, logo or sketch in the reference image as the theme of the dice tray, sculpted on its walls and rim and keeping its design and colours. A single tabletop dice tray designed for 3D printing: one open, shallow tray with thick sturdy walls about 3 cm tall around the whole edge and a wide, perfectly flat, smooth, completely empty floor for rolling dice (no dice, no bumps, no objects and no sculpting on the floor). The theme is sculpted only on the outside of the walls and along the top of the rim, chunky and solid with no thin parts sticking out, everything attached. The bottom of the tray is flat. Shown in a three-quarter view from above so the empty floor inside is clearly visible, the entire tray visible with generous empty margin. Isolated on a seamless pure white (#FFFFFF) background, soft even studio lighting, no shadows on the background, no text. Shape: a round tray about 20 cm across. Light and surfaces: soft, even, diffuse studio light from the front, and at most a soft satin sheen: no mirror-like gloss, no bright white hot spots or glare, and no reflections of lights, windows or surroundings. Finish: painted in rich colours like a finished tabletop piece, with washes and edge highlights.
"""

2. Build the 3D model
Call generate_prism_3_1 with the task_id of the image from step 1 in images, texture_model "3.5", texture_quality "fast", geometry_quality "standard", pbr false, lighting_removal false.

3. Export
Export it for printing: call convert_model on the 3D model with output_format "3mf" (or "stl" if I ask for it), plus max_size and unit "cm" if I gave you a print size.

After each generation call, keep polling get_generation with its task_id until it completes, then show me the result with show_generation before you start the next step.