Turn any shape or drawing into a cookie cutter
Add a photo to start
How this template works
A cookie cutter is the outline of a shape raised into a thin wall. The template finds the outline of the dark shape in your image and builds the cutter right in your browser.
1Open SVG to 3DStep 1 · SVG to 3DBuild the cookie cutter
The largest dark shape becomes the outline. A 0.9 mm cutting edge follows it, and a 3 mm lip around the top gives you something to press on. Nothing is uploaded and no credits are used.
0.9 mm cutting edge · 3 mm pressing lip
Tips for the best result
- A filled silhouette works best: a cat, a star, a logo mark.
- Simple outlines with no very thin parts cut cleanest.
- If your drawing is only an outline, close every gap so the inside is a solid shape.
Do it yourself for more control
- For perfectly sharp outlines from a vector file, use SVG to 3D.
- Print lip-down in PLA or PETG at 100% infill for a stiff edge.
- Want inner details stamped into the dough? Make a matching stamp with the 3D Line Art Maker and its stamp mirror.
Good to know
Only the outer outline is used; inner lines are ignored, and very thin parts under about 3 mm wide won't cut well.
Made with this template
The card in the corner shows what went in.
Each example is an actual run of this template at Standard quality, made from a sample image.
Similar templates
More templates like Cookie Cutter Maker, ready to use the same way.
